Hypoxia-Inducible Factor-1α Regulates High Phosphate-Induced Vascular Calcification via Type III Sodium-Dependent Phosphate Cotransporter 1.

Vascular calcification (VC) has a high incidence in patients with chronic kidney disease, which is a worldwide public health problem and presents a heavy burden to society. Hypoxia-inducible factor (HIF)-1α, the active subunit of HIF-1, has been reported to play a vital role in high phosphate-induced VC. However, the underlying mechanism is still undetermined, and effective treatment is unavailable. In the present study, human aortic smooth muscle cells (HASMCs) were cultured under normal or high phosphate media conditions. HIF-1α small interfering RNA and overexpression plasmids were employed to regulate HIF-1α expression. Phosphonoformic acid was employed to restrain the function of type III sodium-dependent phosphate cotransporter 1 (Pit-1). The expression levels of HIF-1α, Pit-1, runt-related transcription factor 2 (Runx2), and smooth muscle 22 alpha (SM22α) were evaluated, and the calcium contents were also examined. Cell growth was assessed using an MTT assay. High phosphate stimulation caused an upregulation in HIF-1α and Pit-1 expression levels and induced calcium depositions in HASMCs. Upregulation of Runx2 expression accompanied by downregulation of SM22α expression was observed in the high phosphate group. Following the suppression of HIF-1α expression, there was a concomitant attenuation in Pit-1 expression, calcium deposition, the alteration of phenotypic transition marker genes, and vice versa. The most serious calcium deposition was noted in HASMCs cultured under high phosphate conditions which were pretreated with a HIF-1α overexpression plasmid. However, when the biological functions of Pit-1 were restrained, the putative serious calcium deposition was not formed even in HASMCs transfected with a HIF-1α overexpression plasmid. The findings confirmed that HIF-1α regulated Pit-1 expression and exerted its pro-calcifying effect through Pit-1, which identified HIF-1α and Pit-1 as therapeutic targets for high phosphate-induced VC.

miR-148b-3p suppresses the proliferation and migration of Schwann cells by targeting USP6 following sciatic nerve injury.

BACKGROUND: Peripheral nerve injury is a common disorder associated with damaged axons and distal myelin sheath degeneration, and Schwann cells play a paramount role in peripheral nerve regeneration. This study aims to explore the role of microRNA miR-148b-3p on Schwann cells after peripheral nerve injury. METHODS: Sciatic nerve transection was conducted in rat as the model of peripheral nerve injury. The expression level of miR-148b-3p and Ubiquitin Specific Peptidase 6 (USP6) was detected by qRT-PCR and Western blot at diverse time points after nerve transection. Cell migration and proliferation were determined in primary Schwann cells isolated from rat. The functional interaction of miR-148b-3p and USP6 mRNA was validated by dual-luciferase reporter assay. RESULTS: In the animal model of sciatic nerve injury, miR-148b-3p expression level in the proximal nerve stump showed downregulation after nerve transection procedure, while USP6 expression level was elevated. The overexpression of miR-148b-3p inhibited the proliferation and migration of primary Schwann cells, while suppressing miR-148b-3p showed the opposite effect. USP6 mRNA was identified as a target of miR-148b-3p, which was found to mediate the effect of miR-148b-3p. USP6 silencing suppressed the migration and proliferation in primary Schwann cells. CONCLUSION: Our data demonstrated the functional role of miR-148b-3p/USP6 axis in regulating the migration and proliferation of Schwann cells following peripheral nerve injury. miR-148b-3p showed downregulation and its target USP6 was upregulated after nerve transection procedure. Targeting miR-148b-3p/USP6 axis may provide a novel opportunity for peripheral nerve repair.

Iron Sucrose: A Double-Edged Sword in High Phosphate Media-Induced Vascular Calcification.

The high incidence of vascular calcification (VC) in patients with chronic kidney disease (CKD) has become an important clinical subject. Hyperphosphatemia is a primary cause of CKD-related VC. Intravenous iron sucrose (IS) is commonly used to treat anemia in CKD patients, and is effective and well tolerated worldwide. However, the interaction between iron and VC remains controversial, and the underlying mechanisms are yet to be clarified. In the present study, ex vivo normal rat aortic rings were cultured with various concentrations of phosphate and IS, and the levels of calcium and iron depositions, oxidative injury, as well as phenotypic marker genes were detected. To the best of our knowledge, the present study is the first to report that IS is a double-edged sword in high phosphate media-induced VC which not only alleviates VC in a dose-dependent manner but also leads to iron overload in vasculature when in high concentration. IS is a promising agent for VC prevention in patients with hyperphosphatemia and iron deficiency. Meanwhile, the appropriate blood concentration of IS in patients with hyperphosphatemia needs to be explored clinically.

Modulating the properties of multi-functional molecular devices consisting of zigzag gallium nitride nanoribbons by different magnetic orderings: a first-principles study.

Using the non-equilibrium Green's function formalism in combination with density functional theory, we calculated the spin-dependent electronic properties of molecular devices consisting of pristine and hydrogen-terminated zigzag gallium nitride nanoribbons (ZGaNNRs). Computational results show that the proposed ZGaNNR models display multiple functions with perfect spin filtering, rectification, and a spin negative differential resistance (sNDR) effect. Spin-dependent transport properties, spin density and transmission pathways with applied bias values were calculated to understand the spin filter and the sNDR effect. The spin filtering efficiency can be up to -100% or 100% within a large range of biases, and a dual spin filtering effect can also be found in these model devices. The highest rectification ratio reaches 4.9 × 109 in spin-down current of ZGaNNRs with only the passivated nitrogen edge, and only ZGaNNRs with the passivated gallium edge exhibit an obvious sNDR behavior with the largest peak to valley current ratio of 1.25 × 107. The proposed hydrogenated ZGaNNRs can be preferred materials for realizing oscillators, memory circuits and fast switching applications.

Hot-Roll-Pressing Mediated Transfer of Chemical Vapor Deposition Graphene for Transparent and Flexible Touch Screen with Low Sheet-Resistance.

Obstacles associated with graphene as transparent conductive films mainly consist of the difficulties in high-quality graphene synthesis, efficient transfer and doping of samples with lateral size of tens of centimeters for practical applications. Herein we demonstrate a hot-roll-pressing transfer technique followed by wet-chemical doping of large area graphene film grown on copper foil by chemical vapor deposition (CVD). This method enabled cost-effective and ultraclean transfer of single-layer graphene with an arbitrary size onto transparent ethylene vinyl acetate/polyethylene terephthalate (EVA/PET) substrate without any polymer residues. The sheet resistance of the single-layer graphene covered EVA/PET (graphene/EVA/PET) reached 200 Ω/sq with optical transparency of 87.3%. The graphene/EVA/PET film can be bent over 10000 cycles at a radius of 2 mm with ∼0.02% increase in sheet resistance, showing excellent mechanical flexibility for bendable electronics which was demonstrated by a capacitive-type touch screen based on the graphene/EVA/PET transparent conducting film.

Atom-Thick Interlayer Made of CVD-Grown Graphene Film on Separator for Advanced Lithium-Sulfur Batteries.

Lithium-sulfur batteries are widely seen as a promising next-generation energy-storage system owing to their ultrahigh energy density. Although extensive research efforts have tackled poor cycling performance and self-discharge, battery stability has been improved at the expense of energy density. We have developed an interlayer consisting of two-layer chemical vapor deposition (CVD)-grown graphene supported by a conventional polypropylene (PP) separator. Unlike interlayers made of discrete nano-/microstructures that increase the thickness and weight of the separator, the CVD-graphene is an intact film with an area of 5 × 60 cm2 and has a thickness of ∼0.6 nm and areal density of ∼0.15 µg cm-2, which are negligible to those of the PP separator. The CVD-graphene on PP separator is the thinnest and lightest interlayer to date and is able to suppress the shuttling of polysulfides and enhance the utilization of sulfur, leading to concurrently improved specific capacity, rate capability, and cycle stability and suppressed self-discharge when assembled with cathodes consisting of different sulfur/carbon composites and electrolytes either with or without LiNO3 additive.

High Areal Capacity and Lithium Utilization in Anodes Made of Covalently Connected Graphite Microtubes.

Lithium metal is an attractive anode material for rechargeable batteries because of its high theoretical specific capacity of 3860 mA h g-1 and the lowest negative electrochemical potential of -3.040 V versus standard hydrogen electrode. Despite extensive research efforts on tackling the safety concern raised by Li dendrites, inhibited Li dendrite growth is accompanied with decreased areal capacity and Li utilization, which are still lower than expectation for practical use. A scaffold made of covalently connected graphite microtubes is reported, which provides a firm and conductive framework with moderate specific surface area to accommodate Li metal for anodes of Li batteries. The anode presents an areal capacity of 10 mA h cm-2 (practical gravimetric capacity of 913 mA h g-1 ) at a current density of 10 mA cm-2 , with Li utilization of 91%, Coulombic efficiencies of ≈97%, and long lifespan of up to 3000 h. The analysis of structure evolution during charge/discharge shows inhibited lithium dendrite growth and a reversible electrode volume change of ≈9%. It is suggested that an optimized microstructure with moderate electrode/electrolyte interface area is critical to accommodate volume change and inhibit the risks of irreversible Li consumption by side reactions and Li dendrite growth for high-performance Li-metal anodes.

Synthesis of dimethylformamide from CO2, H2 and dimethylamine over Cu/ZnO.

Cheap and simple Cu/ZnO catalysts are very effective and recyclable for the synthesis of dimethylformamide (DMF) from CO(2), H(2), and dimethylamine, and a yield of 97% can be reached.